Design of Short Span Steel Bridges

Frank Russo, Ph.D., PE,
Project Manager
URS Corporation
Philadelphia, PA

John C. Huang, Ph.D., PE,
Principal
CHC Engineering, LLC
Herndon, VA

steel beams Highway bridges are vital links in the nationís transportation network. The Federal Highway Administration estimates nearly one-third of America's 578,000 bridges need to be repaired or replaced. The majority of these bridges are short-span, linking vitally important state, county and municipal roads. The structural advantages of using steel include its lighter weight, which means lighter foundations and lower erection costs. Steel is ideal for short-span bridges because of its durability, ease of maintenance and ease of construction.

Bridge engineering has continued to evolve as increasing knowledge of material properties, structural behavior, and the environment under which they exist change methods of design and construction. In this course, the basic principle and theory of designing short span steel bridges based on AASHTO Load Factor Design method are introduced. An example of steel bridge girder design utilizing this LFD method is also presented.

The course materials were developed in accordance with the Strength Design Method (Load Factor Design) of the AASHTO Standard Specifications for Highway Bridges 16th Edition, 1996, including the 1997, 1998, and 1999 Interim Specifications, referred to herein as the AASHTO Specifications. The course is intended for practice engineers and engineering students with basic knowledge of steel structures.

When designing a short span steel bridge, the following important aspects shall be taken into consideration:

In this course, the focus is on the design issues related to the safety, the serviceability and the constructibility The following summarizes some of the basic design items and design procedures for short span simple steel beam bridges:

In this lessen, you need to view the slide show Design of Short Span Steel Bridges, which includes basic design procedures and a practical example for short span bridge design. If you prefer to study the course content offline, you may download the course content from the following link:

Design of Short Span Steel Bridges (a PDF file, 3.7 MB)

Please click on the underlined hypertext above to view, download or print the document for your study. Because of the large file size, we recommend that you first save the file to your computer by right-clicking the mouse and choosing "Save Target As ...", and then open the file in Adobe Acrobat Reader.

Quiz

Once you finish viewing the slide show, you need to take a quiz to obtain the PDH credits.

Take a Quiz


Additional Technical Resource and Further Readings:

1. American Association of State Highway and Transportation Officials, Manual for Condition Evaluation of Bridges, Washington, DC, 1994.

2. American Association of State Highway and Transportation Officials, Standard Specification for Highway Bridges, 1996, Edition, 1997,1998 and 1999 Interim Specifications - Bridges, Washington, DC.

3. American Association of State Highway and Transportation Officials, Guide for Painting Steel Structures, Washington, DC, 1997.

4. American Iron and Steel Institute, Integral Abutments for Steel Bridges, by Ed Wasserman, PE, and J. Houston Walker, PE, 1996. (Available from the National Steel Bridge Alliance, Chicago, IL).

5. Short Span Bridge Design Software - AISIBEAM V 3.0 / American Iron and Steel Institute (This software is no longer available from AISI).

6. Missouri Highway and Transportation Department. Task Force Report on Weathering Steel, January 1996.

7. Rubeiz, C.G., and Gorman, C.D., Pre-Engineered Short Span Steel Bridges, ASCE Structures Congress, Atlanta, GA, 1994.

8. Taavoni, S., Comprehensive Package for the Design of Short Span Steel Bridges, National Symposium on Steel Bridge Construction, Atlanta, GA, 1993.

9. AASHTO, Guide Specifications for Highway Bridge Fabrication with HPS70W Steel, Washington DC 2000.

***

Acknowledgment:

PDHonline.org acknowledges the sponsorship of American Iron and Steel Institute (AISI) for this online course.

***


DISCLAIMER: The materials contained in the online course are not intended as a representation or warranty on the part of PDHonline.org or any other person/organization named herein. The materials are for general information only. They are not a substitute for competent professional advice. Application of this information to a specific project should be reviewed by a registered professional engineer. Anyone making use of the information set forth herein does so at their own risk and assumes any and all resulting liability arising therefrom.