PDH Online Course Library for Engineers, Architects and Land Surveyors
|
Click Here for Part 1 of the PDH Online Course Catalog
Part 2 of 2
|
PDH Course Number: M101 |
|
CEU Course Title: Mechanical and Electrical Design of Pumping Stations |
|
Professional Development Hour for Engineer (PE): 10 PDH Professional Development Unit for Land Surveyor (LS, PLS): 10 PDU |
|
Continuing Education Unit for Contractor (GC): 1 CEU AIA Learning Unit for Architect (RA): 10 LU |
|
Online Course Price: $249 |
|
PDH Course Description: This online course provides information and criteria pertinent to the design and selection of mechanical and electrical systems for flood-control pumping stations. Details about equipment requirements, material and system selection considerations, testing and maintenance requirements, station wiring and equipment grounding requirements, and environmental protection are also discussed. The course materials are based entirely on the U.S. Army Corps of Engineers' Engineering Manual EM 1110-2-3105: Mechanical and Electrical Design of Pumping Stations (1994 edition with Change 2 dated 1999, 169 pages). This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of course materials. |
|
PDH Course Number: M102 |
|
CEU Course Title: Selecting a Centrifugal Pump to Handle a Viscous Liquid |
|
Professional Development Hour for Engineer (PE): 2 PDH Professional Development Unit for Land Surveyor (LS, PLS): 2 PDU |
|
Continuing Education Unit for Contractor (GC): 0.2 CEU AIA Learning Unit for Architect (RA): 2 LU |
|
Online Course Price: $59 |
|
PDH Course Description: Students of this two-hour online course
will be provided with a basic understanding of fluid viscosity and its
effects on the performance and efficiency of centrifugal pumps. The course
presents definitions, effects and recommendations for conveying viscous
fluids. It presents established predictive techniques to estimate viscous
pump performance. |
|
PDH Course Number: M103 |
|
CEU Course Title: Heating, Ventilating, and Air Conditioning |
|
Professional Development Hour for Engineer (PE): 2 PDH Professional Development Unit for Land Surveyor (LS, PLS): 2 PDU |
|
Continuing Education Unit for Contractor (GC): 0.2 CEU AIA Learning Unit for Architect (RA): 2 LU |
|
Online Course Price: $59 |
|
PDH Course Description: Heating, ventilating and air conditioning (HVAC) is an important aspect in building design. This course provides guidelines for design of mechanical systems for heating, ventilating, and air conditioning (HVAC). The course materials are based entirely on the U.S. Army Corps of Engineers' Technical Manual TM 5-810-1: Heating, Ventilating, and Air Conditioning (1991 edition, 18 pages). This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of course materials. |
|
PDH Course Number: M104 |
|
CEU Course Title: Noise and Vibration Control |
|
Professional Development Hour for Engineer (PE): 10 PDH Professional Development Unit for Land Surveyor (LS, PLS): 10 PDU |
|
Continuing Education Unit for Contractor (GC): 1 CEU AIA Learning Unit for Architect (RA): 10 LU |
|
Online Course Price: $249 |
|
PDH Course Description: Mechanical equipment, such as cooling towers, generates noise and vibration during its normal operation. It is an important aspect of the building design to control the undesirable noise and vibration. This course provides the criteria and guidance required for design and construction of those features related to noise and vibration control of mechanical equipment systems most commonly encountered. The course materials are based entirely on the U.S. Army Corps of Engineers' Technical Manual TM 5-805-4: Noise and Vibration Control (1995 edition, 150 pages). This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of course materials. |
|
PDH Course Number: M105 |
|
CEU Course Title: Plumbing Systems |
|
Professional Development Hour for Engineer (PE): 5 PDH Professional Development Unit for Land Surveyor (LS, PLS): 5 PDU |
|
Continuing Education Unit for Contractor (GC): 0.5 CEU AIA Learning Unit for Architect (RA): 5 LU |
|
Online Course Price: $95 |
|
PDH Course Description: Plumbing systems are important aspects of the building design. This course presents criteria pertinent to the design of drainage (sanitary and storm), water, and fuel gases. Energy conservation requirements are also discussed. The course materials are based entirely on the U.S. Naval Facilities Engineering Command's Design Manual 3.01: Plumbing Systems (1986 edition, 86 pages). This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of course materials. |
|
PDH Course Number: M106 |
|
CEU Course Title: Identifying Risk Factors In Machinery |
|
Professional Development Hour for Engineer (PE): 2 PDH Professional Development Unit for Land Surveyor (LS, PLS): 2 PDU |
|
Continuing Education Unit for Contractor (GC): 0.2 CEU AIA Learning Unit for Architect (RA): 2 LU |
|
Online Course Price: $39 |
|
PDH Course Description: This two-hour course provides an overview of
the basic knowledge required to identify the potential risk factors
associated with machinery. The attendee will understand the information
required to determine risk. Assessment of risk including survey techniques
and risk mitigation are covered in a follow on course. This basic course
includes a multiple-choice quiz at the end. The course reviews the importance
of reliability, design, production, life cycle, environmental, and safety
factors as they pertain to risk. |
|
PDH Course Number: M107 |
|
CEU Course Title: Assessing Risk Factors in Machinery |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: This four-hour course provides the basic knowledge required to assess the potential risk factors associated with machinery. The course quantifies reliability, design, production, life cycle, environmental, and safety factors so they can be assessed. Additional business/management related factors are also covered. Weighting risk factors and the use of risk multipliers is introduced. Risk mitigation strategies are covered in a follow-on course. This course includes a multiple-choice quiz at the end. |
|
PDH Course Number: M108 |
|
CEU Course Title: An Engineer's Guide to Plumbing Cross-Connections |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: Public health officials have rightfully been concerned about cross-connections and back-flow connections in plumbing systems and in public drinking water systems. This course will help Civil, Sanitary, and Mechanical Engineers increase their knowledge of the probability of contamination of drinking water through cross-connection. Numerous documented cases of cross-connection contamination are presented in the course as illustration. This course includes a multiple choice quiz at the end. |
|
PDH Course Number: M109 |
|
CEU Course Title: An Introduction to Indoor Air Pollution |
|
Professional Development Hour for Engineer (PE): 2 PDH Professional Development Unit for Land Surveyor (LS, PLS): 2 PDU |
|
Continuing Education Unit for Contractor (GC): 0.2 CEU AIA Learning Unit for Architect (RA): 2 LU |
|
Online Course Price: $59 |
|
PDH Course Description: The subject of indoor air pollution is not without some controversy. Indoor air quality is an evolving issue; it is important to keep informed about continuing developments in this area. This short course is not a detailed technical treatise on indoor air pollution; it is intended for Architects and Engineers who are interested in a general introductory overview of IAP, its various categories, probable causes, and suggested remedial actions. A substantial portion of this course content is based on, and reproduced with permission from, U.S. GPO Publication No. 1994-523-217/81322 Indoor Air Pollution: An Introduction for Health Professionals, 1994. The publication was co-sponsored by the Environmental Protection Agency (EPA), the American Medical Association (AMA), the Consumer Product Safety Commission (CPSC), and the American Lung Association (ALA). The overwhelming majority of the medical aspects, i.e. physiology, etiology, symptomology, and human physical diagnosis, contained in the GPO publication have been selectively and purposely excluded, again with permission, from this course content. This was done to limit the scope and focus to those aspects of IAP of greater interest to Engineers and Architects. Those students interested in viewing the unmodified original document should point their browser to: http://www.epa.gov/iedweb00/pubs/hpguide.html. Important references and additional health resources can be found at this URL. This course includes a multiple choice quiz at the end. |
|
PDH Course Number: M110 |
|
CEU Course Title: Introduction to Fire Protection Systems |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: The Introduction to Fire Protection Systems Course is designed to provide the student with a fundamental understanding of the basics of combustion; codes and standards related to fire protection; a discussion of water based fire extinguishing systems focusing on sprinkler systems; a discussion of non-water based and special application fire suppression systems; and concludes with a discussion of various fire detectors. The course is divided into five (5) modules that can be studied in any desired sequence. Each module concludes with a quiz to reinforce student comprehension of the material. A sixth module is provided with a list of internet resources which can be used by the student to reinforce the material presented. This course includes a True-False quiz at the end. |
|
PDH Course Number: M110A |
|
CEU Course Title: Introduction to Fire Protection SystemsAIA HSW |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: The Introduction to
Fire Protection Systems Course is designed to provide the student with a fundamental
understanding of the basics of combustion; codes and standards related to
fire protection; a discussion of water based fire extinguishing systems
focusing on sprinkler systems; a discussion of non-water based and special
application fire suppression systems; and concludes with a discussion of
various fire detectors. |
|
PDH Course Number: M111 |
|
CEU Course Title: Safeguarding HVAC Systems Against Chemical, Biological, and Radiological Attacks |
|
Professional Development Hour for Engineer (PE): 2 PDH Professional Development Unit for Land Surveyor (LS, PLS): 2 PDU |
|
Continuing Education Unit for Contractor (GC): 0.2 CEU AIA Learning Unit for Architect (RA): 2 LU |
|
Online Course Price: $59 |
|
PDH Course Description: This course identifies actions that a building owner or manager can implement without undue delay to enhance occupant protection from an airborne chemical, biological, or radiological (CBR) attack. The intended audience includes building owners, managers, and maintenance personnel of public, private, and governmental buildings, including offices, laboratories, hospitals, retail facilities, schools, transportation terminals, and public venues (for example, sports arenas, malls, coliseums). This course is not intended to address single family or low-occupancy residential housing (less than five family units). Higher risk facilities such as industrial facilities, military facilities, subway systems, and law enforcement facilities require special considerations that are beyond the scope of this course. This course includes a multiple-choice quiz at the end. |
|
PDH Course Number: M112 |
|
CEU Course Title: Selection and Sizing of Pressure Relief Valves |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: Students of this three-hour course will be provided with an introduction to the types and styles of pressure relief valves, the requirements for their placement and use, and the methods to determine the correct size of valve to use. This course summarizes reference data and technical recommendation based on many years of industry's experience in sizing, selecting, testing, installing and operating pressure relief valves. Sufficient data is supplied to properly size and select pressure relief valves for specific applications. Information covering terminology, standards, codes, basic design, sizing and selection information, including examples, are presented. The student is responsible for correct determination of service conditions and the suitability of any of the presented information for a specific application. The majority of the material in this course is reproduced or excerpted from publications developed by valve manufacturers, code organizations, and academia. The information contained in this course is offered as a guide. Students who use the general information presented here are reminded that there is no substitute for a case specific qualified engineering analysis. When in doubt as to the proper application of any particular data, the student is advised to contact a pressure relief valve manufacturer. This course includes a multiple-choice quiz at the end. |
|
PDH Course Number: M113 |
|
CEU Course Title: Selection and Sizing of Rupture Discs |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: This course covers the non-reclosing type of pressure relief devices known as rupture discs. It reviews the codes that govern rupture discs and the standard formulas and equations that are used to determine their proper selection and sizing. The course is directed toward Chemical and Mechanical Engineers in the process industries but should provide appeal to general practitioners as well. As a prerequisite, the student should have a basic familiarity with pressure vessels and piping systems. This course includes a multiple choice quiz at the end. |
|
PDH Course Number: M117 |
|
CEU Course Title: Selection Tips For Air-Conditioning Cooling Systems |
|
Professional Development Hour for Engineer (PE): 2 PDH Professional Development Unit for Land Surveyor (LS, PLS): 2 PDU |
|
Continuing Education Unit for Contractor (GC): 0.2 CEU AIA Learning Unit for Architect (RA): 2 LU |
|
Online Course Price: $59 |
|
PDH Course Description: This two hour online course provides comprehensive information on the air-conditioning cooling systems. It details the type and characteristics of commonly used cooling systems with illustrations, advantages and disadvantages. The course is intended for use primarily to the students, end users, consultants, architects, contractors and HVAC designers. The course focuses on the practical aspects of selection and is a recommended guide for the beginners and experience people involved in conceptualizing new project. This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M118 |
|
CEU Course Title: Introduction to Metallurgical Failure Analysis |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: This three hour online course discusses the various types of failure mechanisms and the process of conducting a metallurgical failure analysis. Failure Analysis is one of the most useful techniques for ensuring the safety and reliability of products and plant facilities/components. The main benefits are the prevention of failure in a similar equipment, and improvement in useful service life through design or material modifications. This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M119 |
|
CEU Course Title: HVAC Made Easy - Selection Tips for Chiller Compressors |
|
Professional Development Hour for Engineer (PE): 2 PDH Professional Development Unit for Land Surveyor (LS, PLS): 2 PDU |
|
Continuing Education Unit for Contractor (GC): 0.2 CEU AIA Learning Unit for Architect (RA): 2 LU |
|
Online Course Price: $59 |
|
PDH Course Description: This two-hour course provides comprehensive information on the air-conditioning chillers. The chiller package comprising of refrigerant compressor is a heart of main cooling system. The chiller is a single most expensive item of the air-conditioning system that influences the life cycle economics. The course focuses on the key issues pertaining to chiller selection and their applications. The practical considerations and assessment criterion is addressed in brief and is a recommended reading reference. The course is intended for use primarily to the students, end users, consultants, architects, contractors and HVAC designers. This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M120 |
|
CEU Course Title: HVAC Made Easy - Environmental Issues and Refrigerants |
|
Professional Development Hour for Engineer (PE): 2 PDH Professional Development Unit for Land Surveyor (LS, PLS): 2 PDU |
|
Continuing Education Unit for Contractor (GC): 0.2 CEU AIA Learning Unit for Architect (RA): 2 LU |
|
Online Course Price: $59 |
|
PDH Course Description: This two-hour course discusses the issues related to Ozone layer depletion, Global warming, Green house effect and the Refrigerants. The refrigerants are considered to be one of the major sources of ozone layer depletion. The environmental concerns have put a tremendous pressure on the phase out of certain refrigerants, which have traditionally ruled the global air-conditioning & refrigeration industry for decades. Current and anticipated future restrictions limit or prohibit the use of ozone depletion substances. Refrigerant selection has become a single most important aspect to the life cycle analysis of the air-conditioning plant that shall tip the scales one-way or the other. The course is intended for use primarily to the students, end users, environmentalists, consultants, architects, contractors and HVAC designers. This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M121 |
|
CEU Course Title: Cooling Water Systems - An Overview of Cooling Towers |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: This 4-hour course provides comprehensive information on Cooling Towers. Cooling towers find application in almost all sorts of industries varying from small process plants to the large refineries, petrochemical complexes, fertilizer plants, manufacturing units and power plants. It is difficult to imagine an industry without a cooling tower. The air-conditioning systems for large facilities like commercial complexes, hospitals, hotels, theaters, airports, residential complexes and shopping arcades etc. rely on the heat rejection through cooling towers. The course describes the practical overview of basics, types and selection considerations of the cooling tower systems. The course is intended for use primarily to the students, end users, consultants, architects, contractors and plant designers. The course focuses on the practical aspects of selection and is a recommended guide for the beginners and experience people involved in conceptualizing and specifying Cooling Towers This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M122 |
|
CEU Course Title: Fire Protection for Facilities Engineering, Design and Construction |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: This online course provides an
introduction to the engineering, design and the construction of the fire protection
systems for different facilities. The course materials are based entirely on
the Military Handbook MIL-HDBK-1008C, FIRE PROTECTION FOR FACILITIES
ENGINEERING, DESIGN AND CONSTRUCTION. The purpose of this course is to
provide an understanding to the fire protection system criteria and design
for all types of buildings and their contents, whether considered temporary
or permanent, mobile or stationary equipment, waterfront facilities, and
outside storage facilities. |
|
PDH Course Number: M123 |
|
CEU Course Title: Cooling Water- 'Problems And Solutions' |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: This 3 hours course provides basic knowledge about the cooling water problems and solutions. The course provides insight to the commonly debated water problems and treatment approaches. The course is compiled in a simple question & answer format to reduce the learning time. The course is intended for use primarily to the students, end users, operators, energy & environmental auditors, contractors, O&M engineers and sales people. This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M124 |
|
CEU Course Title: Understanding Net Positive Suction Head |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: Students of this four-hour course will be provided with an introduction to one of the important aspects of proper pump selection: Net Positive Suction Head. This course will review the various aspects of Net Positive Suction Head, including centrifugal pump operation fundamentals, liquid vapor pressure, specific gravity, absolute pressure, and cavitation. Examples of pumping systems, complete with hydraulic analytical solutions, are provided to aid in the understanding of the presented material. Additional and interesting hydraulic facts are randomly interspersed throughout the course. This course includes a multiple choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M125 |
|
CEU Course Title: Basic Pump Parameters and the Affinity Laws |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: Students of this three-hour course will be provided with important concepts associated with the operation of centrifugal pumps to include pump performance parameters, design considerations, efficient operation, and the affinity laws. This course includes a multiple choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M126 |
|
CEU Course Title: Sizing Plumbing Water System |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: This 3-hour course provides design criteria for estimating potable water use. This course addresses the residential demands and demands for transitory use facilities. This course is intended to provide basic information, which may be used for conceptual design in the absence of any more appropriate information. It is suitable for students, architects, plumbers, engineers and the facility designers. This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M127 |
|
CEU Course Title: Building Automation Systems after September 11th |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |
|
Continuing Education Unit for Contractor (GC): 0.3 CEU AIA Learning Unit for Architect (RA): 3 LU |
|
Online Course Price: $89 |
|
PDH Course Description: This 3-hour course intends to describe the Building Automation System (BAS) for commercial buildings. BAS represent the state of art microprocessor based technology, which integrates the security, fire protection, electrical, telecommunication and HVAC systems at one centralized location. BAS ensures efficient, comfortable and safe environment in the building. The course is intended for use primarily to the students, end users, consultants, architects, contractors and HVAC designers. This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M128 |
|
CEU Course Title: Selecting a Centrifugal Pump by System Analysis |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: Pump selection should be based on system evaluation, not on maximum flow and head. Maximum capacity and head are important pieces of information, but much more must be known to achieve the best pump installation. Just because a pump delivers enough liquid at the desired pressure does not prove the pump is adequate. The information presented in this course provides much of the information needed for an evaluation of most types of systems. Additional data will be needed for specific installations. This course includes a multiple choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M129 |
|
CEU Course Title: Conservation Technology Series: Simple Heat Exchangers for Commercial Automatic Ice Makers |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: This four-hour course is part of a series of courses designed to promote energy and resource conservation. This course introduces the reader to an energy-saving mechanism for use on commercial automatic ice makers. Potential benefits and application features of this technology are explored. Critical performance factors are identified within the coursework to allow the reader to evaluate the cost-effectiveness of a site-specific application. Case studies are also presented as examples for further analysis. At the conclusion of the course study, the reader must complete a multiple-choice quiz to demonstrate competency is the course material and obtain PDH credits. This course includes a multiple-choice quiz at the end, which is designed to enhance the understanding of the course materials. |
|
PDH Course Number: M130 |
|
CEU Course Title: Overview of Vapor Absorption Chilling Systems |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: "How can you
have cooling with heat?"
The course is intended for use primarily to the students, end
users, consultants, architects, contractors and HVAC designers. |
|
PDH Course Number: M131 |
|
CEU Course Title: HVAC Energy Conservation through Cooling Water Conditioning |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: This 4-hour course discusses the HVAC
system energy conservation through cooling water treatment. The savings are
associated with the prevention or removal of scale built up on a heat
exchange surfaces where even a thin film of 1/32" or 0.8mm can increase
the energy consumption by nearly 10%. |
|
PDH Course Number: M132 |
|
CEU Course Title: The Performance Monitoring and Maintenance Audit of HVAC System |
|
Professional Development Hour for Engineer (PE): 4 PDH Professional Development Unit for Land Surveyor (LS, PLS): 4 PDU |
|
Continuing Education Unit for Contractor (GC): 0.4 CEU AIA Learning Unit for Architect (RA): 4 LU |
|
Online Course Price: $119 |
|
PDH Course Description: This 4-hour course provides overview of
operation and maintenance (O&M) programs specifically designed to enhance
HVAC systems without significant capital investment. The intent of this paper
is not to provide hardcore maintenance or troubleshooting aspects but an
insight to O&M practices that can ensure the best performance and comfort
for your system. |
|
PDH Course Number: M133 |
|
CEU Course Title: HVAC Design Considerations for Corrosive Environments |
|
Professional Development Hour for Engineer (PE): 3 PDH Professional Development Unit for Land Surveyor (LS, PLS): 3 PDU |